home *** CD-ROM | disk | FTP | other *** search
- ReadMe File for the AMD-640 Patch Version 1.3
-
- july 29, 1997
-
- I. Introduction
- ================
- In Windows 95 version OSR2.0 or earlier, the Univeral Serial Bus (USB)
- and the PCI to ISA Bridge devices from the AMD-640 chipsets mainboard
- cannot be correctly recognised and the drivers for these devices were not
- included too. So after installation of the Windows 95, there will always
- be a QUESTION MARK next to these 2 devices. Indicating that the the driver
- is not installed or the device is not working properly.
-
- The problem is that Windows 95 OSR2.0 or earlier version, were released
- before the AMD-640 chipsets hit the market. So these earlier version of
- the OS, do not have the correct drivers build-in.
-
- In order to resolve this problem, we are offering this patch program, to
- allow Windows 95 to correctly detect the devices. After installing this
- program, you will find that both of these devices show they are working
- properly.
-
-
- II. Files
- =================
- The files are:
-
- -- README.TXT - This ReadMe file.
- -- PATCH640.EXE - This Program file
-
- III. Installation
- =================
- Step 1.) Explore the PATCH640.EXE.
- Step 2.) Run PATCH640.EXE in Windows 95 environment.
- Step 3.) Select 'OK' to implement patch.
- Step 4.) Windows 95 will display messages as patch finished, Press 'OK'
- button to reboot.
- Step 5.) When Windows 95 restarted, it will display messages that it had
- detected various new hardware components in the system, and
- proceed with its own installation procedure. When prompted to
- restart Windows, click Yes to restart Windows. This may repeat
- for several times. Finally when Windows 95 complete its bootup
- procedure, check the Device Manager again. You will see that
- all devices show it is working normally.
-
- ===========================================================
- Copyright (c) 1997 Holco Enterprise Co., Ltd.
- All Rights Reserved.
-